0x1998 - MANAGER

Düzenlenen Dosya: img2webp.1

.\" Hey, EMACS: -*- nroff -*- .TH IMG2WEBP 1 "November 26, 2024" .SH NAME img2webp \- create animated WebP file from a sequence of input images. .SH SYNOPSIS .B img2webp [file_options] [[frame_options] frame_file]... [\-o webp_file] .br .B img2webp argument_file_name .br .SH DESCRIPTION This manual page documents the .B img2webp command. .PP \fBimg2webp\fP compresses a sequence of images using the animated WebP format. Input images can either be PNG, JPEG, TIFF or WebP. If a single file name (not starting with the character '\-') is supplied as the argument, the command line arguments are actually tokenized from this file. This allows for easy scripting or using a large number of arguments. .SH FILE-LEVEL OPTIONS The file-level options are applied at the beginning of the compression process, before the input frames are read. .TP .BI \-o " string Specify the name of the output WebP file. .TP .BI \-min_size Encode images to achieve smallest size. This disables key frame insertion and picks the parameters resulting in the smallest output for each frame. It uses lossless compression by default, but can be combined with \-q, \-m, \-lossy or \-mixed options. .TP .BI \-kmin " int .TP .BI \-kmax " int Specify the minimum and maximum distance between consecutive key frames (independently decodable frames) in the output animation. The tool will insert some key frames into the output animation as needed so that this criteria is satisfied. .br .B \-mixed Mixed compression mode: optimize compression of the image by picking either lossy or lossless compression for each frame heuristically. This global option disables the local option \fB-lossy\fP and \fB-lossless\fP . .TP .BI \-near_lossless " int Specify the level of near\-lossless image preprocessing. This option adjusts pixel values to help compressibility, but has minimal impact on the visual quality. It triggers lossless compression mode automatically. The range is 0 (maximum preprocessing) to 100 (no preprocessing, the default). The typical value is around 60. Note that lossy with \fB\-q 100\fP can at times yield better results. .TP .B \-sharp_yuv Use more accurate and sharper RGB->YUV conversion. Note that this process is slower than the default 'fast' RGB->YUV conversion. .TP .BI \-loop " int Specifies the number of times the animation should loop. Using '0' means 'loop indefinitely'. .TP .BI \-v Be more verbose. .TP .B \-h, \-help A short usage summary. .TP .B \-version Print the version numbers of the relevant libraries used. .SH PER-FRAME OPTIONS The per-frame options are applied for the images following as arguments in the command line. They can be modified any number of times preceding each particular input image. .TP .BI \-d " int Specify the image duration in milliseconds. .TP .B \-lossless, \-lossy Compress the next image(s) using lossless or lossy compression mode. The default mode is lossless. .TP .BI \-q " float Specify the compression factor between 0 and 100. The default is 75. .TP .BI \-m " int Specify the compression method to use. This parameter controls the trade off between encoding speed and the compressed file size and quality. Possible values range from 0 to 6. Default value is 4. When higher values are used, the encoder will spend more time inspecting additional encoding possibilities and decide on the quality gain. Lower value can result in faster processing time at the expense of larger file size and lower compression quality. .TP .B \-exact, \-noexact Preserve or alter RGB values in transparent area. The default is \fB-noexact\fP, to help compressibility. Note \fB\-noexact\fP may cause artifacts in frames compressed with \fB\-lossy\fP. .SH EXIT STATUS If there were no problems during execution, \fBimg2webp\fP exits with the value of the C constant \fBEXIT_SUCCESS\fP. This is usually zero. .PP If an error occurs, \fBimg2webp\fP exits with the value of the C constant \fBEXIT_FAILURE\fP. This is usually one. .SH EXAMPLE img2webp -loop 2 in0.png -lossy in1.jpg -d 80 in2.tiff -o out.webp .br .SH AUTHORS \fBimg2webp\fP is a part of libwebp and was written by the WebP team. .br The latest source tree is available at https://chromium.googlesource.com/webm/libwebp .PP This manual page was written by Pascal Massimino <pascal.massimino@gmail.com>, for the Debian project (and may be used by others). .SH REPORTING BUGS Please report all bugs to the issue tracker: https://issues.webmproject.org .br Patches welcome! See this page to get started: https://www.webmproject.org/code/contribute/submitting\-patches/ .SH SEE ALSO .BR webpmux (1), .BR gif2webp (1) .br Please refer to https://developers.google.com/speed/webp/ for additional information.
geri dön