0x1998 - MANAGER

Düzenlenen Dosya: zh-simplified.php

<?php // auto generated, do not modify $strings += array( "Diagnosis Result" => "诊断结果", "Item" => "项目", "Level" => "级别", "Result" => "结果", "Explanation/Suggestion" => "解释/建议", "XCache extension" => "XCache extension", "Add extension=xcache.so (or xcache.dll) in %s" => "在 %s 增加 extension=xcache.so (或 xcache.dll)", "Please put a php.ini in %s and add extension=xcache.so (or xcache.dll) in it" => "请在 %s 里放个 php.ini 并且在文件内写入 extension=xcache.so (或 xcache.dll)", "Cannot detect php.ini location" => "无法检测 php.ini 位置", "(See above)" => "(参见上面)", "Not loaded" => "未载入", "error" => "错误", "Loaded" => "已载入", "info" => "信息", "Enabling PHP Cacher" => "启用 PHP 缓存器", "skipped" => "跳过", "Not enabled" => "尚未启用", "Your PHP pages is not accelerated by XCache. Set xcache.size to non-zero, set xcache.cacher = On" => "XCache 并未对您的 PHP 网页起到加速作用. 设置 xcache.size 为非 0, 设置 xcache.cacher = On", "No php script cached" => "未缓存任何 PHP 脚本", "Your PHP pages is not accelerated by XCache. Set xcache.cacher = On" => "XCache 并未对您的 PHP 网页起到加速作用. 设置 xcache.cacher = On", "Enabled" => "已启用", "PHP Compile Time Error" => "PHP 编译时错误", "warning" => "警告", "Error happened when compiling one or some of your PHP code" => "至少在编译一个或多个您的 PHP 代码时发生编译错误", "PHP code failed to be compiled cannot be cached. This usually means there was syntax error in your PHP code. Enable PHP error_log to see what parser error is it, fix your code. This warning won't go away until PHP is restarted" => "编译失败的 PHP 代码是无法缓存的. 这通常意味着您的 PHP 代码有语法错误. 请启用 error_log 调查具体错误原因并修复您的代码. 重启 PHP 前这个警告不会消失", "No error happened" => "未发生过错误", "Busy Compiling" => "忙着编译", "Cache marked as busy for compiling" => "编译中, 缓存标记为忙", "It's ok if this status don't stay for long. Otherwise, it could be a sign of PHP crash/coredump, report to XCache devs" => "这个状态如果持续不就则无影响. 否则可能标志着 PHP 曾经发生异常退出, 如果是的话请报告给 XCache 开发组", "Idle" => "空闲", "Enabling VAR Cacher" => "启用 VAR 缓存器", "PHP code that use XCache caching backend have to use other caching backend instead. Set xcache.var_size to non-zero if you have any PHP code that can use XCache Data Caching API" => "支持使用 XCache 作为数据缓存器的 PHP 代码将不得不采用其他缓存器代替. 如果您有代码支持 XCache 缓存 API 的话, 您可以设置 xcache.var_size 为非 0", "Using VAR Cacher" => "使用 VAR 缓存器", "No variable data cached" => "未缓存任何变量数据", "Var Cacher won't work simply by enabling it. PHP code must call XCache APIs like xcache_set() to use it as cache backend. 3rd party web apps may come with XCache support, config it to use XCache as caching backend" => "只启用变量数据缓存器并无法将其利用起来. 必须通过 PHP 代码去调用 XCache API 接口(如 xcache_set() 函数) 将 XCache 作为缓存器. 第三方网页软件可能带有 XCache 支持, 留意其中的设置启用 XCache 作为缓存器", "Cache in use" => "缓存使用中", "Cache Size" => "缓存大小", "Out of memory happened when trying to write to cache" => "存入缓存时发生内存不足", "Increase xcache.size and/or xcache.var_size" => "加大 xcache.size 或 xcache.var_size", "Enough" => "充足", "Hash Slots" => "哈希槽", "Slots value too big" => "哈希槽设定太大", "A very small value is set to %s value and leave %s value is too big.\nDecrease %s if small cache is really what you want" => "设置给 %s 的值很小, 却采用过大的 %s. 如果您的确想要配置占用很少内存的缓存器, 可减少 %s", "Slots value too small" => "哈希槽设定太小", "So many item are cached. Increase %s to a more proper value" => "相当多的项目缓存了. 请适量加大 %s", "Looks good" => "看起来还行", "Cache Status" => "缓存状态", "At least one of the caches is disabled. " => "至少一个缓存器是禁止状态", "Enable the cache." => "启用已禁止的缓存器.", "It was disabled by PHP crash/coredump handler or you disabled it manually." => "可能是在 PHP 异常退出时自动标记为禁止了, 或者您手工禁止了", "You disabled it manually." => "您手工禁止了", "If it was caused by PHP crash/coredump, report to XCache devs" => "如果是由于 PHP 异常退出造成, 请报告给 XCache 开发组", "Coredump Directory" => "Coredump 目录", "Enable coredump to save debugging information in case when PHP crash. It can also be enabled in other module like php-fpm beside XCache" => "启用 coredump 设置. 这样万一发生 PHP 异常退出时可保存调试信息. 这个功能也可以在其他地方启用, 如 php-fpm", "Core files found:\n" => "发现 core 文件:\n", "Disable XCache PHP Cacher (set xcache.size=0), remove the core file(s), then restart PHP. If core file appears again, report call stack backtrace in the core to XCache devs" => "禁止 XCache 缓存器 (设置 xcache.size=0), 删除 Core 文件, 再重启 PHP. 如果不用 XCache 时不出现 Core, 请从 Core 中取得 call stack back trace 信息报告回 XCache 开发组", "You can see core files if PHP crash in %s if PHP crash" => "如果 PHP 异常退出, 您可以在 %s 目录看到 Core 文件", "Readonly Protection" => "只读保护", "Set to enabled but not available" => "设置为启用, 但目前不可用", "Use xcache.mmap_path other than /dev/zero" => "设置 xcache.mmap_path 使用 /dev/zero 以外的值", "Disabled" => "已禁止", "Enable readonly_protection == --performance & ++stability. Disable readonly_protection == ++performance & --stability" => "启用 readonly_protection == --性能 & ++稳定性. 禁用 readonly_protection == ++性能 & --稳定性", "XCache modules" => "XCache 模块", "Acceptable. Module(s) listed are built into XCache but not for production server.\nLeave it as is if you're feeling good.\nRe-configure XCache with the module(s) disabled if you're strict with server security." => "可接受. 以上列出的模块已编译入 XCache, 但这些模块并非用于产业服务器.\n如果您觉得没大碍, 就保持现状.\n如果您对稳定性/安全性要求极其严格, 建议重新编译 XCache 不启用这些模块\n", "XCache test setting" => "XCache 测试设置", "xcache.test is for testing only, not for server. set it to off" => "xcache.test 仅用于开发测试用, 不用于服务器. 将它设置为 off", "PHP Version" => "PHP 版本", "The version of PHP you're using is known to be unstable: " => "您所使用的 PHP 版本, 是众所周知的不稳定版本: ", "Upgrade to new version of PHP" => "升级到更新的 PHP 版本", "Extension Compatibility" => "Extension 兼容性", "Zend Optimizer loaded" => "Zend Optimizer 载入了", "Optimizer feature of 'Zend Optimizer' is disabled by XCache due to compatibility reason; the Loader of it is still available, encoded files are still supported" => "由于兼容性问题, 'Zend Optimizer' 的优化器已被 XCache 禁止; 其加载器依然可用, 可继续使用 Zend 加密的文件", "SAPI Compatibility" => "Extension 兼容性", "CGI is not supported" => "不支持 CGI", "Use FastCGI or FPM instead" => "请改用 FastCGI 或者 FPM", "PHP_FCGI_CHILDREN should be >= 1 and use 1 group of parent/childs model. See http://xcache.lighttpd.net/wiki/Faq" => "PHP_FCGI_CHILDREN 应该设为 >= 1 并且使用 1 组单父多子模型. 参见 http://xcache.lighttpd.net/wiki/Faq", );
geri dön